Expression 3 - ETC

Copying time code events
If you are creating a series of similar time code events, you may find it
easier to create one event and then copy that as the basis for additional
events. Follow the procedure below to copy a selected event or range of
events to different code times:
Keystrokes:
1. Press [S7] until [S2] reads
Copy Event.
Actions:
2. Press [S2], Copy Event. Prompt reads:
Select event number(s) to copy,
then press ENTER. To cancel, press
CLEAR
3. Press [1] [Thru] [5] [Enter]. Selects events 1 through 5 to copy
Prompt reads:
To copy selected event(s), select
time and press ENTER. To cancel,
press CLEAR
4. Press [Time] [Time] [2][5]. Selects 25 seconds for the first event
to copy
5. Press [Enter]. Copies event 1 to a new event starting
at 25 seconds; the rest of the events
maintain their original relationship in
time
304 Chapter 24 Control interfaces