23.11.2012 Views

Laws, Rules and Regulations - The National Board of Boiler and ...

Laws, Rules and Regulations - The National Board of Boiler and ...

Laws, Rules and Regulations - The National Board of Boiler and ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

168<br />

prOVInCIal Department<br />

Edward Hurd<br />

Provincial Safety Manager<br />

British Columbia Safety Authority<br />

505 6 th Street, Suite 200<br />

New Westminster, B.C. V3L 0E1<br />

Canada<br />

Telephone — 778.396 .2000<br />

Fax — 778.396.2064<br />

empOWerment<br />

Minister empowered to make, amend, <strong>and</strong> alter rules <strong>and</strong> regulations.<br />

<strong>Boiler</strong> <strong>Board</strong>: No.<br />

Date OF laW paSSaGe: 1896<br />

brItISH COlUmbIa<br />

Date <strong>of</strong> latest amendment to law: Dec. 2011.<br />

Date rules <strong>and</strong> regulations implemented: 1896.<br />

Date <strong>of</strong> latest rules <strong>and</strong> regulations: Dec. 2011.<br />

Provincial statute: Revised Statutes <strong>of</strong> British Columbia, Safety St<strong>and</strong>ards Act. Power Engineers <strong>Boiler</strong> Pressure Vessel <strong>and</strong><br />

Refrigeration Safety Regulation.<br />

rUleS FOr COnStrUCtIOn anD StampInG<br />

Construction:<br />

1. CSA B51 (2009 Edition), B52 (2005 Edition); N285.0-08.<br />

2. ASME Code (2010 Edition, 2011 Addendum), Sections I, II, III (Divisions 1, 2), IV, V, VI, VII, VIII (Divisions 1, 2, 3), IX, X, XI,<br />

XII, <strong>and</strong> code cases.<br />

3. ASME Code addenda <strong>and</strong> case interpretations adopted after review by boiler safety manager.<br />

4. ASME CSD-1 (2009 Edition)<br />

5. ASME B31.1 (2010 Edition), B31.3 (2010 Edition), B31.5 (2010 Edition). B31.9 2011.<br />

6. ASME PVHO-1 (2007 Edition)<br />

7. ASME PTC 25 (2008 Edition)<br />

8. ASME/ANSI QAI-1-2010<br />

9. ANSI K61.1 (1999 Edition)<br />

10. API STD 530 Revision 2008; 510 Revision Edition 9; 570 Revision Edition 3.<br />

11. Manufacturers must file copy <strong>of</strong> the ASME Manufacturer’s Data Report or an Affidavit <strong>of</strong> Manufacturer for each boiler or<br />

pressure vessel. Affidavit forms supplied by the authority on request. Data report <strong>and</strong> stamping shall show the Canadian<br />

registration number.<br />

12. NFPA-85, 2011 Edition.<br />

13. Manufacturers must submit designs <strong>of</strong> boilers, pressure vessels, <strong>and</strong> fittings for acceptance <strong>and</strong> registration before<br />

commencing fabrication.<br />

14. Shop inspections must be carried out by holder <strong>of</strong> a <strong>National</strong> <strong>Board</strong> Commission <strong>and</strong> “A” endorsement.<br />

15. Liquified petroleum gas containers must comply with requirements <strong>of</strong> ASME Code. Designs must be submitted for survey<br />

<strong>and</strong> registration.<br />

16 . <strong>National</strong> <strong>Board</strong> Inspection Code (2011 Edition).<br />

Stamping:<br />

Where appropriate, the following <strong>National</strong> <strong>Board</strong> stamps or ASME Code symbol stamps are required:<br />

IMPORTANT NOTICE: Every effort has been made to make<br />

this synopsis as accurate <strong>and</strong> complete as possible. However,<br />

jurisdictional laws, regulations <strong>and</strong> rules are subject to change<br />

without notice. As a result, the information contained herein is<br />

neither guaranteed nor warranted. User is advised to consult<br />

the jurisdiction’s chief inspector before reaching any decision that<br />

may have critical impact or significant financial consequences.<br />

MEMBER<br />

JURISDICTION<br />

2013 <strong>National</strong> <strong>Board</strong> Synopsis <strong>of</strong> <strong>Boiler</strong> <strong>and</strong> Pressure Vessel <strong>Laws</strong>, <strong>Rules</strong> <strong>and</strong> <strong>Regulations</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!