Laws, Rules and Regulations - The National Board of Boiler and ...

197
19. Periodic inspection or shop inspection of boiler .......................................................................................$164.00 - $953.00 CAD
20. Periodic inspection or shop inspection of pressure vessel ...................................................................$102.00 - $1,117.00 CAD
21. Permit fee for installation, repair, or alteration of boiler ............................................................................$50.00 - $778.00 CAD
22. Permit fee for installation, repair, or alteration of pressure vessel ...........................................................$26.00 - $932.00 CAD
23. Permit fee for installation, repair, or alteration of refrigeration plant ......................................................$54.00 - $103.00 CAD
24. Operating license for boiler ..............................................................................................................................$50.00 - $778.00 CAD
25. Operating license for pressure vessel ..............................................................................................................$76.00 - $432.00 CAD
26. Operating license for refrigeration plant ........................................................................................................$54.00 - $103.00 CAD
27. License to operate as operator ........................................................................................................................$88.00 - $246.00 CAD
28. Operator examination fee..................................................................................................................................$20.00 - $102.00 CAD
29. NH3 storage and distribution plant license .............................................................................................$140.00 - $1,080.00 CAD
mISCellaneOUS
1. Pressure welders are subject to qualification tests.
2. All low-pressure boilers of 50 hp or more and all high-pressure boilers of 15 hp or more shall be in the charge of a
certified engineer or fireman as required in the regulations.
3. New installations require prior approval of chief inspector.
4. Chief inspector must be immediately notified by telephone or any other direct means of any explosion, serious fire,
rupture, serious overheating of a boiler, pressure vessel, plant or pressure piping system; or any accident that causes
death or serious injury to a person and arises out of the operation of a boiler, pressure vessel, plant, or pressure piping
system.
5. All pressure piping designs over 0.5 cubic meters in internal volume must be stamped by a professional engineer.
6. Additional construction regulations are in force and available, without charge, from the Authority.
7. License is required to install or repair a boiler, pressure vessel, pressure piping system, or refrigeration plant.
8. Operators of boilers and pressure vessels are required to be licensed. An operator must be in attendance during boiler
operation.
9. An annual license to operate is required for all boilers, pressure vessels, and refrigeration plants.
10. Category A, B, C and G fittings, as set out in Table 1 of the CSA B51 code, are not required to be registered.
11. All boilers and pressure vessels must be registered with a Saskatchewan CRN. Alternatively boilers and pressure vessels
are not required to be registered with a Saskatchewan CRN if:
a. the boiler or pressure vessel is:
• constructed in strict compliance with the administrative and technical rules of the appropriate section of the
ASME code;
• stamped with the applicable code symbol stamp in accordance with the ASME code;
• registered with NBBI;
• the NBBI registration number is recorded on the data report and stamped on the name plate of the boiler or
pressure vessel; and
• the owner has submitted the data report to the chief inspector for registration along with the appropriate
registration fee.
b. the boiler or pressure vessel is:
• constructed in a province or territory of Canada other than Saskatchewan in strict compliance with the
administrative and technical rules of the appropriate section of the CSA B51 code;
• assigned a Canadian registration number by the boiler and pressure vessel authority of the province or territory
in which it is constructed;
• inspected during construction by an inspector employed by the boiler and pressure vessel authority of the
province or territory in which it is constructed;
• the registration number of the province or territory in which the boiler or pressure vessel is constructed is
recorded on the data report required by the CSA B51 code and stamped on the name plate of the boiler or
pressure vessel; and
• the owner has submitted the data report to the chief inspector for registration along with the appropriate
registration fee.
2013 National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations