Laws, Rules and Regulations - The National Board of Boiler and ...

36
State Department
Clayton C. Novak, Chief Boiler Inspector
Boiler and Pressure Vessel Safety
Office of State Fire Marshal
Division of Boiler and Pressure Vessel Safety
James R. Thompson Center
100 W. Randolph St., Suite 4600
Chicago, IL 60601
Telephone —217.785.1008 Email — Clayton Novak@illinois.gov
217.782.2696
Fax — 217.785.4184
empOWerment
IllInOIS
Board of Boiler and Pressure Vessel Rules and Regulations empowered to make, alter, and amend rules and regulations.
Boiler Board: Yes. (Contact above official for more information.)
Date OF laW paSSaGe: 1951
Date of latest amendment to law: May 2006.
Date rules and regulations implemented: 1952.
Date of latest amendment to rules and regulations: July 2011.
State statute: Illinois Compiled Statutes, Health and Safety, Chapter 430. Public Safety, Subchapter 75. Boiler and Pressure
Vessel Safety Act, Sections 1 through 16.
rUleS FOr COnStrUCtIOn anD StampInG
Construction:
1. ASME Code (2007 Edition), Sections I, II, IV, V, VI, VII, VIII (Divisions 1, 2, 3), IX, X.
2. ASME CSD-1a (2004 Edition).
3. ASME B31.1 (2007 Edition), Section I only.
4. Manufacturers must file a copy of Manufacturer’s Data Report for boilers and pressure vessels with the National Board.
5. National Board Inspection Code (2007 Edition).
6. National Board registration required for boilers and pressure vessels.
7. API-510 (8th Edition, First Supplement).
8. Owner/user pressure vessels shall be inspected in accordance with API-510 when such owner/user organizations are
approved by the division.
9. NFPA 85
IMPORTANT NOTICE: Every effort has been made to make
this synopsis as accurate and complete as possible. However,
jurisdictional laws, regulations and rules are subject to change
without notice. As a result, the information contained herein is
neither guaranteed nor warranted. User is advised to consult
the jurisdiction’s chief inspector before reaching any decision that
may have critical impact or significant financial consequences.
The National Board assumes no responsibility for information
posted on external Web sites.
MEMBER
JURISDICTION
10. Special design or construction requires approval of Board of Boiler and Pressure Vessel Rules and Regulations before construction
is started.
Stamping:
Where appropriate, the following National Board stamps or ASME Code symbol stamps are required:
1. National Board: R, VR.
2. ASME Code: A, E, H, HLW, HV, M, PP, RP, S, U, U2, UM, UV, V. Nuclear stamps N, NA, NPT, NV come under the jurisdiction
of the Illinois Emergency Management Agency.
ObJeCtS SUbJeCt tO rUleS FOr COnStrUCtIOn anD StampInG
All boilers and pressure vessels, except the following:
1. Boilers and pressure vessels under federal control, except those located in cities of more than 500,000 inhabitants.
2013 National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations