Laws, Rules and Regulations - The National Board of Boiler and ...

190
f. Shop inspection per hour ............................................................................................................................................$85.00 CAD
g. Welder certification per hour ....................................................................................................................................$85.00 CAD
2. Fees for initial and periodic inspection:
a. Boilers (depending on size) ....................................................................................................................$50.00 to $600.00 CAD
b. Pressure vessels (depending on size) ...................................................................................................$35.00 to $150.00 CAD
mISCellaneOUS
1. National Board registration required for boilers and pressure vessels manufactured outside Canada.
2. Repairs by fusion welding must be performed by welders qualified in accordance with ASME Code Section IX.
3. Welders’ tests are conducted by the Boiler and Pressure Vessel Division. All welders must be retested annually.
4. A permit is required to make major repairs to a boiler, pressure vessel, or pressure piping system.
5. All propane gas systems must be inspected by an inspector prior to filling.
6. Medical gas piping is included within the scope of the Boiler and Pressure Vessel Act.
7. Operator’s license is required to operate boilers above 1,500,000 BTU per hour.
8. A copy of the jurisdictional laws, rules and regulations may be obtained through:
Island Information Services
P.O. Box 2000
Charlottetown, PE
C1A 7N8 Canada
or at www.gov.pe.ca.
2013 National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations