Laws, Rules and Regulations - The National Board of Boiler and ...
Laws, Rules and Regulations - The National Board of Boiler and ...
Laws, Rules and Regulations - The National Board of Boiler and ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
198<br />
terrItOrY Department<br />
Vacant<br />
Government <strong>of</strong> Yukon<br />
Public Safety Branch<br />
P.O. Box 2703<br />
Whitehorse, Yukon Territory Y1A 2C6<br />
Canada<br />
Telephone —867.667.5765<br />
867.667.5825<br />
Fax — 867.393.6249<br />
Express mail only:<br />
2071 Second Avenue<br />
Whitehorse, Yukon Territory<br />
Y1A 1B2 Canada<br />
empOWerment<br />
<strong>The</strong> commissioner empowered to make regulations <strong>and</strong> prescribe forms under<br />
the ordinance.<br />
<strong>Boiler</strong> <strong>Board</strong>: No.<br />
Date OF laW paSSaGe: 1949<br />
YUKOn terrItOrY<br />
Date <strong>of</strong> latest amendment to law: November 1980.<br />
Date rules <strong>and</strong> regulations implemented: 1949.<br />
Date <strong>of</strong> latest rules <strong>and</strong> regulations: November 1980.<br />
Territory statute: Revised Statutes <strong>of</strong> Yukon, Volume 1. Chapter 11. Power Engineers, <strong>Boiler</strong>s <strong>and</strong> Pressure Act.<br />
rUleS FOr COnStrUCtIOn anD StampInG<br />
Construction:<br />
1. CSA: B51 (2003 Edition), B52 (2005 Edition), Z184 (1973 Edition), B139 (1976 Edition), B149 (1976 Edition).<br />
2. ASME Code (2004 Edition), Sections I, II, III, IV, V, VI, VII, VIII (Divisions 1, 2), IX, X.<br />
3. ANSI/ASME B31.1 (2004 Edition), B31.3 (2004 Edition), B31.4 (1974 Edition), B31.5 (1974 Edition), B16.5 (1968 Edition),<br />
K61.1, Z106.1 (1974 Edition).<br />
4. Manufacturers must register with department <strong>and</strong> submit designs <strong>and</strong> specifications for approval before installation.<br />
5. Special design or construction requires approval <strong>of</strong> the chief boiler inspector.<br />
6. Secondh<strong>and</strong> boilers or pressure vessels shall not be sold, exchanged or otherwise disposed <strong>of</strong>, except to manufacturers<br />
or dealers, until owner has received permission from the chief boiler inspector.<br />
7. <strong>Boiler</strong>s or pressure vessels imported into the territory, previously used outside the territory, shall not be installed until<br />
approved by the chief boiler inspector.<br />
8. Foreign codes: any design which has not been approved <strong>and</strong> registered must be submitted to the chief inspector for approval<br />
<strong>and</strong> registration <strong>of</strong> the design.<br />
9. <strong>National</strong> <strong>Board</strong> Inspection Code (Current Edition, Current Addendum).<br />
Stamping:<br />
Where appropriate, the following <strong>National</strong> <strong>Board</strong> stamps or ASME Code symbol stamps are required:<br />
1. <strong>National</strong> <strong>Board</strong>: R (accepted).<br />
2. ASME Code: all.<br />
IMPORTANT NOTICE: Every effort has been made to make<br />
this synopsis as accurate <strong>and</strong> complete as possible. However,<br />
jurisdictional laws, regulations <strong>and</strong> rules are subject to change<br />
without notice. As a result, the information contained herein is<br />
neither guaranteed nor warranted. User is advised to consult<br />
the jurisdiction’s chief inspector before reaching any decision that<br />
may have critical impact or significant financial consequences.<br />
MEMBER<br />
JURISDICTION<br />
2013 <strong>National</strong> <strong>Board</strong> Synopsis <strong>of</strong> <strong>Boiler</strong> <strong>and</strong> Pressure Vessel <strong>Laws</strong>, <strong>Rules</strong> <strong>and</strong> <strong>Regulations</strong>
Change language