Laws, Rules and Regulations - The National Board of Boiler and ...

91
State Department
Mechanical Unit:
Roy L. Perry, Safety Manager/Mechanical Unit
Occupational Safety and Health Administration
Dept. of Business & Industry
1301 North Green Valley Parkway, Suite 160
Henderson, NV 89074
Telephone — 702.486.9062 Email — rperry@business.nv.gov
Fax — 702.486.9176
empOWerment
Department of Business and Industry empowered to make, alter, or amend rules and regulations.
Boiler Board: No.
Date OF laW paSSaGe: 1956
Mechanical Unit:
Date of latest amendment to law: December 2008.
Date rules and regulations implemented: 1956.
Date of latest rules and regulations: December 2004.
State statute: Nevada Administrative Code, Title 455C. Safety and Health.
Mine Section:
neVaDa
IMPORTANT NOTICE: Every effort has been made to make
this synopsis as accurate and complete as possible. However,
jurisdictional laws, regulations and rules are subject to change
without notice. As a result, the information contained herein is
neither guaranteed nor warranted. User is advised to consult
the jurisdiction’s chief inspector before reaching any decision that
may have critical impact or significant financial consequences.
MEMBER
JURISDICTION
Date of latest amendment to law: October 1982.
Date rules and regulations implemented: 1909.
Date of latest rules and regulations: January 2000.
State statute: Code of Federal Regulations, Parts 56 and 57 and Nevada Administrative Code, Title 455C. Safety and Health,
Chapter 512. Safety of Mines, Sections 510 through 594.
rUleS FOr COnStrUCtIOn anD StampInG
Construction:
1. ASME Code (2010 Edition), Sections I, II, IV, V, VI, VII, VIII (Divisions 1, 2, 3), IX, X.
2. ASME CSD-1 (2012 Edition).
3. ASME B31.1 (2012 Edition).
4. Installers must file a copy of Manufacturer’s Data Report with the Mechanical Unit or Mine Section.
5. National Board Inspection Code (2011 Edition).
6. National Board registration required for boilers and pressure vessels.
7. Foreign codes: special design or construction requires approval of the division and must be registered with the National
Board.
Stamping:
Where appropriate, the following National Board stamps or ASME Code symbol stamps are required:
1. National Board: NR, R, VR.
2. ASME Code: A, E, H, HLW, HV, M, NV, PP, S, U, U2, UM, UV, V.
All boilers and pressure vessels must be inspected prior to use. Boilers and pressure vessels under Mechanical Unit jurisdiction must also be
registered prior to use.
2013 National Board Synopsis of Boiler and Pressure Vessel Laws, Rules and Regulations