Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsclear mac address-tableclear mac address-tableUse the clear mac address-table privileged EXEC command on the switch stack or on a standaloneswitch to delete from the MAC address table a specific dynamic address, all dynamic addresses on aparticular interface, all dynamic addresses on stack members, or all dynamic addresses on a particularVLAN. This command also clears the MAC address notification global counters.clear mac address-table {dynamic [address mac-addr | interface interface-id | vlan vlan-id] |notification}Syntax Descriptiondynamicdynamic addressmac-addrdynamic interfaceinterface-iddynamic vlan vlan-idnotificationDelete all dynamic MAC addresses.(Optional) Delete the specified dynamic MAC address.(Optional) Delete all dynamic MAC addresses on the specified physical portor port channel.(Optional) Delete all dynamic MAC addresses for the specified VLAN. Therange is 1 to 4094.Clear the notifications in the history table and reset the counters.DefaultsNo default is defined.Command ModesPrivileged EXECCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.ExamplesThis example shows how to remove a specific MAC address from the dynamic address table:Switch# clear mac address-table dynamic address 0008.0070.0007You can verify that the information was deleted by entering the show mac address-table privilegedEXEC command.Related CommandsCommandmac address-table notification\show mac address-tableshow mac address-table notificationsnmp trap mac-notification changeDescriptionEnables the MAC address notification feature.Displays the MAC address table static and dynamic entries.Displays the MAC address notification settings for allinterfaces or the specified interface.Enables the Simple Network Management Protocol (SNMP)MAC address notification trap on a specific interface.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-101