Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

ip sticky-arp (global configuration)Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commands• Use the no sticky-arp global configuration command to disable sticky ARP on the switch.• Use the no sticky-arp interface configuration command to disable sticky ARP on an interface whensticky ARP is disabled on the switch.ExamplesTo disable sticky ARP:Switch(config)# no ip sticky-arpYou can verify your settings by using the show arp privileged EXEC command.Related Commands Command DescriptionarpAdds a permanent entry in the ARP table. For syntax information,see the Cisco IOS IP Addressing Services Command Reference,Release 12.4 > ARP Commands.show arpDisplays the entries in the ARP table. For syntax information, see theCisco IOS IP Addressing Services Command Reference,Release 12.4 > ARP Commands.2-276Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08