Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET
11.07.2015 • Views
Share Embed Flag

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

SHOW MORE
SHOW LESS
ePAPER READ
DOWNLOAD ePAPER
cisco.dnip.net

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

Chapter 2<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> <strong>Cisco</strong> <strong>IOS</strong> Comm<strong>and</strong>scluster comm<strong>and</strong>er-addresscluster comm<strong>and</strong>er-addressYou do not need to enter this comm<strong>and</strong> from the switch stack or from a st<strong>and</strong>alone cluster member switch.The cluster comm<strong>and</strong> switch automatically provides its MAC address to cluster member switches whenthese switches join the cluster. The cluster member switch adds this information <strong>and</strong> other clusterinformation to its running configuration file. Use the no form of this global configuration comm<strong>and</strong> fromthe cluster member switch console port or Ethernet management port to remove the switch from a clusteronly during debugging or recovery procedures.cluster comm<strong>and</strong>er-address mac-address [member number name name]no cluster comm<strong>and</strong>er-addressSyntax Descriptionmac-addressMAC address of the cluster comm<strong>and</strong> switch.member number (Optional) Number of a configured cluster member switch. The range is 0to 15.name name(Optional) Name of the configured cluster up to 31 characters.DefaultsThe switch is not a member of any cluster.Comm<strong>and</strong> ModesGlobal configurationComm<strong>and</strong> HistoryRelease12.2(35)SE2ModificationThis comm<strong>and</strong> was introduced.Usage GuidelinesThis comm<strong>and</strong> is available only on the cluster comm<strong>and</strong> switch stack or the cluster comm<strong>and</strong> switch.A cluster member can have only one cluster comm<strong>and</strong> switch.The cluster member switch retains the identity of the cluster comm<strong>and</strong> switch during a system reload byusing the mac-address parameter.You can enter the no form on a cluster member switch to remove it from the cluster during debugging orrecovery procedures. You would normally use this comm<strong>and</strong> from the cluster member switch consoleport or Ethernet management port only when the member has lost communication with the clustercomm<strong>and</strong> switch. With normal switch configuration, we recommend that you remove cluster memberswitches only by entering the no cluster member n global configuration comm<strong>and</strong> on the clustercomm<strong>and</strong> switch.When a st<strong>and</strong>by cluster comm<strong>and</strong> switch becomes active (becomes the cluster comm<strong>and</strong> switch), itremoves the cluster comm<strong>and</strong>er address line from its configuration.OL-9776-08<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> Comm<strong>and</strong> Reference2-111

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!