Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandserrdisable recovery cause small-frameerrdisable recovery cause small-frameUse the errdisable recovery cause small-frame global configuration command on the switch stack oron a standalone switch to enable the recovery timer for ports to be automatically re-enabled after theyare error disabled by the arrival of small frames. Use the no form of this command to return to the defaultsetting.errdisable recovery cause small-frameno errdisable recovery cause small-frameSyntax DescriptionThis command has no arguments or keywords.DefaultsThis feature is disabled.Command ModesGlobal configurationCommand HistoryRelease12.2(44)SEModificationThis command was introduced.Usage GuidelinesThis command enables the recovery timer for error-disabled ports. You configure the recovery time byusing the errdisable recovery interval interval interface configuration command.ExamplesThis example shows how to set the recovery timer:Switch(config)# errdisable recovery cause small-frameYou can verify your setting by entering the show interfaces user EXEC command.Related CommandsCommanderrdisable detect cause small-frameshow interfacessmall-frame violation rateDescriptionAllows any switch port to be put into the error-disabledstate if an incoming frame is smaller than the configuredminimum size and arrives at the specified rate (threshold).Displays the interface settings on the switch, includinginput and output flow control.Configures the size for an incoming (small) frame to causea port to be put into the error-disabled state.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-193