Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsmab request format attribute 32mab request format attribute 32Use the mab request format attribute 32 vlan access-vlan global configuration command to enableVLAN ID-based MAC authentication on a switch. Use the no form of this command to return to thedefault setting.mab request format attribute 32 vlan access-vlanno mab request format attribute 32 vlan access-vlanSyntax DescriptionThis command has no arguments or keywords.DefaultsVLAN-ID based MAC authentication is disabled.Command ModesGlobal configurationCommand HistoryRelease12.2(52)SEModificationThis command was introduced.Usage GuidelinesUse this command to allow a RADIUS server to authenticate a new user based on the host MAC addressand VLAN.Use this feature on networks with the Microsoft IAS RADIUS server. The Cisco ACS ignores thiscommand.ExamplesThis example shows how to enable VLAN-ID based MAC authentication on a switch:Switch(config)# authentication mac-move permitRelated CommandsCommandauthentication eventauthenticationfallbackauthenticationhost-modeauthentication openauthentication orderauthenticationperiodicauthenticationport-controlDescriptionSets the action for specific authentication events.Configures a port to use web authentication as a fallback method for clientsthat do not support IEEE 802.1x authentication.Sets the authorization manager mode on a port.Enables or disables open access on a port.Sets the order of authentication methods used on a port.Enable or disables reauthentication on a port.Enables manual control of the port authorization state.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-329