Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsboot manualboot manualUse the boot manual global configuration command on a standalone switch to enable manually bootingthe switch during the next boot cycle. Use the no form of this command to return to the default setting.boot manualno boot manualSyntax DescriptionThis command has no arguments or keywords.DefaultsManual booting is disabled.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesThis command works properly only from a standalone switch in a stack.The next time you reboot the system, the switch is in boot loader mode, which is shown by the switch:prompt. To boot up the system, use the boot boot loader command, and specify the name of the bootableimage.This command changes the setting of the MANUAL_BOOT environment variable. For moreinformation, see Appendix A “Catalyst 3750-E and 3560-E Switch Boot Loader Commands.”Related CommandsCommandshow bootDescriptionDisplays the settings of the boot environment variables.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-73