11.07.2015 Views

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

mls qos mapChapter 2<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> <strong>Cisco</strong> <strong>IOS</strong> Comm<strong>and</strong>smls qos mapUse the mls qos map global configuration comm<strong>and</strong> on the switch stack or on a st<strong>and</strong>alone switch todefine the class of service (CoS)-to-Differentiated Services Code Point (DSCP) map, DSCP-to-CoSmap, the DSCP-to-DSCP-mutation map, the IP-precedence-to-DSCP map, <strong>and</strong> the policed-DSCP map.Use the no form of this comm<strong>and</strong> to return to the default map.mls qos map {cos-dscp dscp1...dscp8 | dscp-cos dscp-list to cos | dscp-mutationdscp-mutation-name in-dscp to out-dscp | ip-prec-dscp dscp1...dscp8 | policed-dscp dscp-listto mark-down-dscp}no mls qos map {cos-dscp | dscp-cos | dscp-mutation dscp-mutation-name | ip-prec-dscp |policed-dscp}Syntax Description cos-dscp dscp1...dscp8 Define the CoS-to-DSCP map.For dscp1...dscp8, enter eight DSCP values that correspond to CoS values 0to 7. Separate each DSCP value with a space. The range is 0 to 63.dscp-cos dscp-list tocosdscp-mutationdscp-mutation-namein-dscp to out-dscpip-prec-dscpdscp1...dscp8policed-dscp dscp-listto mark-down-dscpDefine the DSCP-to-CoS map.For dscp-list, enter up to eight DSCP values, with each value separated by aspace. The range is 0 to 63. Then enter the to keyword.For cos, enter a single CoS value to which the DSCP values correspond. Therange is 0 to 7.Define the DSCP-to-DSCP-mutation map.For dscp-mutation-name, enter the mutation map name.For in-dscp, enter up to eight DSCP values, with each value separated by aspace. Then enter the to keyword.For out-dscp, enter a single DSCP value.The range is 0 to 63.Define the IP-precedence-to-DSCP map.For dscp1...dscp8, enter eight DSCP values that correspond to the IPprecedence values 0 to 7. Separate each DSCP value with a space. The rangeis 0 to 63.Define the policed-DSCP map.For dscp-list, enter up to eight DSCP values, with each value separated by aspace. Then enter the to keyword.For mark-down-dscp, enter the corresponding policed (marked down) DSCPvalue.The range is 0 to 63.2-360<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> Comm<strong>and</strong> ReferenceOL-9776-08

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!