Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsclear lacpclear lacpUse the clear lacp privileged EXEC command on the switch stack or on a standalone switch to clearLink Aggregation Control Protocol (LACP) channel-group counters.clear lacp {channel-group-number counters | counters}Syntax Descriptionchannel-group-number (Optional) Channel group number. The range is 1 to 48.countersClear traffic counters.DefaultsNo default is defined.Command ModesPrivileged EXECCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesYou can clear all counters by using the clear lacp counters command, or you can clear only the countersfor the specified channel group by using the clear lacp channel-group-number counters command.ExamplesThis example shows how to clear all channel-group information:Switch# clear lacp countersThis example shows how to clear LACP traffic counters for group 4:Switch# clear lacp 4 countersYou can verify that the information was deleted by entering the show lacp counters or the show lacp 4counters privileged EXEC command.Related CommandsCommandshow lacpDescriptionDisplays LACP channel-group information.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-99