Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsmls qos srr-queue input priority-queueExamplesThis example shows how to assign the ingress bandwidths for the queues in the stack. Queue 1 is thepriority queue with 10 percent of the bandwidth allocated to it. The bandwidth ratio allocated to queues1 and 2 is 4/(4+4). SRR services queue 1 (the priority queue) first for its configured 10 percentbandwidth. Then SRR equally shares the remaining 90 percent of the bandwidth between queues 1 and2 by allocating 45 percent to each queue:Switch(config)# mls qos srr-queue input priority-queue 1 bandwidth 10Switch(config)# mls qos srr-queue input bandwidth 4 4You can verify your settings by entering the show mls qos interface [interface-id] queueing or the showmls qos input-queue privileged EXEC command.Related Commands Command Descriptionmls qos srr-queue input bandwidth Assigns shaped round robin (SRR) weights to an ingressqueue.mls qos srr-queue input buffers Allocates the buffers between the ingress queues.mls qos srr-queue input cos-map Maps class of service (CoS) values to an ingress queue ormaps CoS values to a queue and to a threshold ID.mls qos srr-queue input dscp-map Maps Differentiated Services Code Point (DSCP) values to aningress queue or maps DSCP values to a queue and to athreshold ID.mls qos srr-queue input threshold Assigns weighted tail-drop (WTD) threshold percentages to aningress queue.show mls qos input-queueDisplays ingress queue settings.show mls qos interface queueing Displays quality of service (QoS) information.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-379