Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

clear eap sessionsChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsclear eap sessionsUse the clear eap sessions privileged EXEC command on the switch stack or on a standalone switch toclear Extensible Authentication Protocol (EAP) session information for the switch or for the specifiedport.clear eap sessions [credentials name [interface interface-id] | interface interface-id | methodname | transport name] [credentials name | interface interface-id | transport name] ...Syntax Descriptioncredentials nameinterface interface-idmethod nametransport nameClear EAP credential information for the specified profile.Clear EAP information for the specified interface.Clear EAP information for the specified method.Clear EAP transport information for the specified lower level.DefaultsNo default is defined.Command ModesPrivileged EXECCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesYou can clear all counters by using the clear eap sessions command, or you can clear only the specificinformation by using the keywords.ExamplesThis example shows how to clear all EAP information:Switch# clear eap sessionsThis example shows how to clear EAP-session credential information for the specified profile:Switch# clear eap sessions credential type1You can verify that the information was deleted by entering the show dot1x privileged EXEC command.Related CommandsCommandshow eapDescriptionDisplays EAP registration and session information for the switch or forthe specified port2-90Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08