Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

mac access-groupChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS CommandsExamplesThis example shows how to apply a MAC extended ACL named macacl2 to an interface:Switch(config)# interface gigabitethernet1/0/1Switch(config-if)# mac access-group macacl2 inYou can verify your settings by entering the show mac access-group privileged EXEC command. Youcan see configured ACLs on the switch by entering the show access-lists privileged EXEC command.Related Commands Command Descriptionshow access-listsDisplays the ACLs configured on the switch.show mac access-group Displays the MAC ACLs configured on the switch.show running-config Displays the operating configuration. For syntax information, use thislink to the Cisco IOS Release 12.2 Command Reference listing page:http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_reference_list.htmlSelect the Cisco IOS Commands Master List, Release 12.2 tonavigate to the command.2-332Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08