11.07.2015 Views

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

mls qos dscp-mutationChapter 2<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> <strong>Cisco</strong> <strong>IOS</strong> Comm<strong>and</strong>smls qos dscp-mutationUse the mls qos dscp-mutation interface configuration comm<strong>and</strong> on the switch stack or on a st<strong>and</strong>aloneswitch to apply a Differentiated Services Code Point (DSCP)-to-DSCP-mutation map to a DSCP-trustedport. Use the no form of this comm<strong>and</strong> to return the map to the default settings (no DSCP mutation).mls qos dscp-mutation dscp-mutation-nameno mls qos dscp-mutation dscp-mutation-nameSyntax Descriptiondscp-mutation-nameName of the DSCP-to-DSCP-mutation map. This map was previouslydefined with the mls qos map dscp-mutation global configurationcomm<strong>and</strong>.DefaultsThe default DSCP-to-DSCP-mutation map is a null map, which maps incoming DSCPs to the sameDSCP values.Comm<strong>and</strong> ModesInterface configurationComm<strong>and</strong> HistoryRelease12.2(35)SE2ModificationThis comm<strong>and</strong> was introduced.Usage GuidelinesIf two quality of service (QoS) domains have different DSCP definitions, use theDSCP-to-DSCP-mutation map to translate one set of DSCP values to match the definition of anotherdomain. You apply the DSCP-to-DSCP-mutation map to the receiving port (ingress mutation) at theboundary of a quality of service (QoS) administrative domain.With ingress mutation, the new DSCP value overwrites the one in the packet, <strong>and</strong> QoS h<strong>and</strong>les the packetwith this new value. The switch sends the packet out the port with the new DSCP value.You can configure multiple DSCP-to-DSCP-mutation maps on ingress ports.You apply the map only to DSCP-trusted ports. If you apply the DSCP mutation map to an untrustedport, to class of service (CoS) or IP-precedence trusted port, the comm<strong>and</strong> has no immediate effect untilthe port becomes DSCP-trusted.ExamplesThis example shows how to define the DSCP-to-DSCP-mutation map named dscpmutation1<strong>and</strong> to applythe map to a port:<strong>Switch</strong>(config)# mls qos map dscp-mutation dscpmutation1 10 11 12 13 to 30<strong>Switch</strong>(config)# interface gigabitethernet3/0/1<strong>Switch</strong>(config-if)# mls qos trust dscp<strong>Switch</strong>(config-if)# mls qos dscp-mutation dscpmutation12-358<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> Comm<strong>and</strong> ReferenceOL-9776-08

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!