Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

aaa accounting dot1xChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsradiustacacs+(Optional) Enable RADIUS authorization.(Optional) Enable TACACS+ accounting.DefaultsAAA accounting is disabled.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesThis command requires access to a RADIUS server.We recommend that you enter the dot1x reauthentication interface configuration command beforeconfiguring IEEE 802.1x RADIUS accounting on an interface.ExamplesThis example shows how to configure IEEE 802.1x accounting:Switch(config)# aaa new-modelSwitch(config)# aaa accounting dot1x default start-stop group radiusNoteThe RADIUS authentication server must be properly configured to accept and log update or watchdogpackets from the AAA client.Related CommandsCommandaaa authenticationdot1xaaa new-modeldot1x reauthenticationdot1x timeoutreauth-periodDescriptionSpecifies one or more AAA methods for use on interfaces runningIEEE 802.1x.Enables the AAA access control model. For syntax information, see theCisco IOS Security Command Reference, Release 12.2 > Authentication,Authorization, and Accounting > Authentication Commands.Enables or disables periodic reauthentication.Sets the number of seconds between re-authentication attempts.2-2Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08