Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsradius-server dead-criteriaRelated Commands Command Descriptiondot1x critical (global configuration) Configures the parameters for the inaccessible authenticationbypass feature.dot1x critical (interfaceconfiguration)radius-server retransmit retriesradius-server timeout secondsshow running-configEnables the inaccessible authentication bypass feature on aninterface and configures the access VLAN to which the switchassigns the critical port when the port is in thecritical-authentication state.Specifies the number of times that the switch tries to reach theRADIUS servers before considering the servers to beunavailable. For syntax information, select Cisco IOS SecurityCommand Reference, Release 12.2 > Server SecurityProtocols > RADIUS Commands.Specifies the time in seconds during which the switch waits fora RADIUS server to respond before the IEEE 802.1xauthentication times out. For syntax information, select CiscoIOS Security Command Reference, Release 12.2 > ServerSecurity Protocols > RADIUS Commands.Displays the operating configuration. For syntax information,use this link to the Cisco IOS Release 12.2 CommandReference listing page:http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_reference_list.htmlSelect the Cisco IOS Commands Master List, Release 12.2to navigate to the command.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-457