Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

clear port-securityChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS CommandsExamplesThis example shows how to clear all secure addresses from the MAC address table:Switch# clear port-security allThis example shows how to remove a specific configured secure address from the MAC address table:Switch# clear port-security configured address 0008.0070.0007This example shows how to remove all the dynamic secure addresses learned on a specific interface:Switch# clear port-security dynamic interface gigabitethernet1/0/1This example shows how to remove all the dynamic secure addresses from the address table:Switch# clear port-security dynamicYou can verify that the information was deleted by entering the show port-security privileged EXECcommand.Related Commands Command Descriptionswitchport port-securityEnables port security on an interface.switchport port-securitymac-address mac-addressConfigures secure MAC addresses.switchport port-security maximumvalueshow port-securityConfigures a maximum number of secure MAC addresses on asecure interface.Displays the port security settings defined for an interface or forthe switch.2-106Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08