Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

authentication mac-move permitChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsauthentication mac-move permitUse the authentication mac-move permit global configuration command to enable MAC move on aswitch. Use the no form of this command to return to the default setting.authentication mac-move permitno authentication mac-move permitSyntax DescriptionThis command has no arguments or keywords.DefaultsMAC move is enabled.Command ModesGlobal configurationCommand HistoryRelease12.2(52)SEModificationThis command was introduced.Usage GuidelinesThe command enables authenticated hosts to move between 802.1x-enabled ports on a switch. Forexample, if there is a device between an authenticated host and port, and that host moves to another port,the authentication session is deleted from the first port, and the host is reauthenticated on the new port.If MAC move is disabled, and an authenticated host moves to another port, it is not reauthenticated, anda violation error occurs.MAC move is not supported on port-security enabled 802.1x ports. If MAC move is globally configuredon the switch and a port security-enabled host moves to an 802.1x-enabled port, a violation error occurs.ExamplesThis example shows how to enable MAC move on a switch:Switch(config)# authentication mac-move permitRelated CommandsCommandauthentication eventauthenticationfallbackauthenticationhost-modeauthentication openauthentication orderauthenticationperiodicDescriptionSets the action for specific authentication events.Configures a port to use web authentication as a fallback method for clientsthat do not support IEEE 802.1x authentication.Sets the authorization manager mode on a port.Enables or disables open access on a port.Sets the order of authentication methods used on a port.Enable or disables reauthentication on a port.2-34Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08