Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS CommandsnmspnmspUse the nmsp global configuration command to enable Network Mobility Services Protocol (NMSP) onthe switch. Use the no form of this command to return to the default setting.nmsp {enable | {notification interval {attachment | location} interval-seconds}}no nmsp {enable | {notification interval {attachment | location} interval-seconds}}Syntax Descriptionenablenotification intervalattachmentlocationinterval-secondsEnable the NMSP features on the switch.Specify the NMSP notification interval.Specify the attachment notification interval.Specify the location notification interval.Duration in seconds before a switch sends the MSE the location orattachment updates. The range is 1 to 30; the default is 30.DefaultsNMSP is disabled.Command ModesGlobal configurationCommand HistoryRelease12.2(50)SEModificationThis command was introduced.Usage GuidelinesUse the nmsp global configuration command to enable the switch to send NMSP location andattachment notifications to a Cisco Mobility Services Engine (MSE).Examples This example shows how to enable NMSP on a switch and set the location notification time to 10seconds:Switch(config)#nmsp enableSwitch(config)#nmsp notification interval location 10Related CommandsCommandclear nmsp statisticsnmsp attachment suppressshow nmspDescriptionClears the NMSP statistic counters.Suppresses reporting attachment information from a specifiedinterface.Displays the NMSP information.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-405