Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

clear pagpChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsclear pagpUse the clear pagp privileged EXEC command on the switch stack or on a standalone switch to clearPort Aggregation Protocol (PAgP) channel-group information.clear pagp {channel-group-number counters | counters}Syntax Descriptionchannel-group-number (Optional) Channel group number. The range is 1 to 48.countersClear traffic counters.DefaultsNo default is defined.Command ModesPrivileged EXECCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesYou can clear all counters by using the clear pagp counters command, or you can clear only the countersfor the specified channel group by using the clear pagp channel-group-number counters command.ExamplesThis example shows how to clear all channel-group information:Switch# clear pagp countersThis example shows how to clear PAgP traffic counters for group 10:Switch# clear pagp 10 countersYou can verify that information was deleted by entering the show pagp privileged EXEC command.Related CommandsCommandshow pagpDescriptionDisplays PAgP channel-group information.2-104Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08