Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

oot auto-download-swChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsboot auto-download-swUse the boot auto-download-sw global configuration command on the switch stack to specify a URLpathname to use for the automatic software upgrades. Use the no form of this command to remove thesoftware image.boot auto-download-sw source-urlno boot auto-download-swNoteThis command is supported only on Catalyst 3750-E switches.Syntax Descriptionsource-urlThe source URLs for the software images. The image-name.tar is thesoftware image to download and install on the switch.These options are supported:• Local flash file system syntax on the standalone switch or the stackmaster:flash:Local flash file system syntax on a stack member:flash member number:The member number can be from 1 to 9.• FTP syntax:ftp:[[//username[:password]@location]/directory]/image-name.tar• HTTP server syntax for an HTTP server:http://[[username:password]@]{hostname |host-ip}[/directory]/image-name.tar• Secure HTTP server syntax:https://[[username:password]@]{hostname |host-ip}[/directory]/image-name.tar• Remote Copy Protocol (RCP) syntax:rcp:[[//username@location]/directory]/image-name.tar• Secure Copy Protocol (SCP) syntax:scp:[[//username@location]/directory]/image-name.tar• TFTP syntax:tftp:[[//location]/directory]/image-name.tarDefaultsDisabled.Command ModesGlobal configuration2-66Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08