Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

copy logging onboardChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandscopy logging onboardUse the copy logging onboard privileged EXEC command on the switch stack or on a standalone switchto copy on-board failure logging (OBFL) data to the local network or a specific file system.copy logging onboard module stack-member destinationSyntax Descriptionmodulestack-memberdestinationSpecify the stack member number. If the switch is a standalone switch, the switchnumber is 1. If the switch is in a stack, the range is 1 to 9, depending on the switchmember numbers in the stack.This keyword is supported only on on stacking-capable switches.Specify the location on the local network or file system to which the systemmessages are copied.For destination, specify the destination on the local or network file system and thefilename. These options are supported:• The syntax for the local flash file system:flash[number]:/filenameUse the number parameter to specify the stack member number of the stackmaster. The range for number is 1 to 9.• The syntax for the FTP:ftp://username:password@host/filename• The syntax for an HTTP server:http://[[username:password]@]{hostname | host-ip}[/directory]/filename• The syntax for the NVRAM:nvram:/filename• The syntax for the null file system:null:/filename• The syntax for the Remote Copy Protocol (RCP):rcp://username@host/filename• The syntax for the switch file system:system:filename• The syntax for the temporary file system:tmpsys:/filename• The syntax for the TFTP:tftp:[[//location]/directory]/filenameDefaultsThis command has no default setting.Command ModesPrivileged EXEC2-124Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08