Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

deny (ARP access-list configuration)Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS CommandsCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesYou can add deny clauses to drop ARP packets based on matching criteria.ExamplesThis example shows how to define an ARP access list and to deny both ARP requests and ARP responsesfrom a host with an IP address of 1.1.1.1 and a MAC address of 0000.0000.abcd:Switch(config)# arp access-list static-hostsSwitch(config-arp-nacl)# deny ip host 1.1.1.1 mac host 0000.0000.abcdSwitch(config-arp-nacl)# endYou can verify your settings by entering the show arp access-list privileged EXEC command.Related CommandsCommandarp access-listip arp inspection filter vlanpermit (ARP access-listconfiguration)show arp access-listDescriptionDefines an ARP access control list (ACL).Permits ARP requests and responses from a host configured with astatic IP address.Permits an ARP packet based on matches against the DHCP bindings.Displays detailed information about ARP access lists.2-130Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08