Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

power rpsChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandspower rpsTo configure and manage the Cisco Redundant Power System 2300, also referred to as the RPS 2300,connected to a Catalyst 3750-E switch stack or a standalone switch , use the power rps user EXECcommand.power rps switch-number {name {string | serialnumber} | port rps-port-id {mode {active |standby}{priority priority}Syntax Descriptionswitch-numbername {string |serialnumber}Specify the stack member to which the RPS 2300 is connected. The rangeis 1 to 9, depending on the switch member numbers in the stack.This parameter is available only on Catalyst 3750-E switches.Set the name of the RPS:• Enter a string to specify the name such as port1 or “port 1”. Usingquotation marks before and after the name is optional, but you mustuse quotation marks if you want to include spaces in the port name.The name can have up to 16 characters.• Enter the serialnumber keyword to configure the switch to use theRPS serial number as the name.port rps-port-id Specify the RPS port. The range is from 1 to 6.mode {active | standby} Set the mode of the RPS port:priority priority• active—The RPS can provide power to a switch when the switchinternal power supply cannot.• standby—The RPS is not providing power to a switch.Set the priority of the RPS port. The range is from 1 to 6, where 1 is thehighest priority and 6 is the lowest priority.DefaultsThe name of the RPS 2300 is not configured.The RPS ports are in active mode.The RPS port priority is 6.Command ModesUser EXECCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesThe power rps command applies only to an RPS 2300 connected to a Catalyst 3560-E switch, aCatalyst 3750-E standalone switch, or a switch stack with only Catalyst 3750-E switches.When configuring an RPS 2300 in a switch stack with only Catalyst 3750-E switches, you must specifythe stack member before entering the name or serial number of the RPS.2-444Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08