Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

mls qos srr-queue input buffersChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsmls qos srr-queue input buffersUse the mls qos srr-queue input buffers global configuration command on the switch stack or on astandalone switch to allocate the buffers between the ingress queues. Use the no form of this commandto return to the default setting.mls qos srr-queue input buffers percentage1 percentage2no mls qos srr-queue input buffersSyntax Descriptionpercentage1percentage2Percentage of buffers allocated to ingress queues 1 and 2. The range is 0 to100. Separate each value with a space.Defaults Ninety percent of the buffers is allocated to queue 1, and 10 percent of the buffers is allocated to queue 2.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesYou should allocate the buffers so that the queues can handle any incoming bursty traffic.ExamplesThis example shows how to allocate 60 percent of the buffer space to ingress queue 1 and 40 percent ofthe buffer space to ingress queue 2:Switch(config)# mls qos srr-queue input buffers 60 40You can verify your settings by entering the show mls qos interface [interface-id] buffers or the showmls qos input-queue privileged EXEC command.Related CommandsCommandmls qos srr-queue input bandwidthmls qos srr-queue input cos-mapmls qos srr-queue input dscp-mapmls qos srr-queue input priority-queueDescriptionAssigns shaped round robin (SRR) weights to an ingressqueue.Maps class of service (CoS) values to an ingress queueor maps CoS values to a queue and to a threshold ID.Maps Differentiated Services Code Point (DSCP) valuesto an ingress queue or maps DSCP values to a queue andto a threshold ID.Configures the ingress priority queue and guaranteesbandwidth.2-372Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08