Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

exception crashinfoChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsexception crashinfoUse the exception crashinfo global configuration command on the switch stack or on a standaloneswitch to configure the switch to create the extended crashinfo file when the Cisco IOS image fails. Usethe no form of this command to disable this feature.exception crashinfono exception crashinfoSyntax DescriptionThis command has no arguments or keywords.DefaultsThe switch creates the extended crashinfo file.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesThe basic crashinfo file includes the Cisco IOS image name and version that failed, and a list of theprocessor registers, and a stack trace. The extended crashinfo file includes additional information thatcan help determine the cause of the switch failure.If you enter the exception crashinfo global configuration command on a stack master, it configures allthe stack members to create the extended crashinfo file if the Cisco IOS image on the stack members fail.Use the no exception crashinfo global configuration command to configure the switch to not create theextended crashinfo file.ExamplesThis example shows how to configure the switch to not create the extended crashinfo file:Switch(config)# no exception crashinfoYou can verify your settings by entering the show running-config privileged EXEC command.Related CommandsCommandshow running-configDescriptionDisplays the operating configuration. For syntax information, usethis link to the Cisco IOS Release 12.2 Command Reference listingpage:http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_reference_list.htmlSelect the Cisco IOS Commands Master List, Release 12.2 tonavigate to the command.2-194Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08