Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

cluster standby-groupChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS CommandsThis example shows the error message when this command is executed on a cluster command switch andthe specified HSRP standby group does not exist:Switch(config)# cluster standby-group my_hsrp%ERROR: Standby (my_hsrp) group does not existThis example shows the error message when this command is executed on a cluster member switch:Switch(config)# cluster standby-group my_hsrp routing-redundancy%ERROR: This command runs on a cluster command switchYou can verify your settings by entering the show cluster privileged EXEC command. The output showswhether redundancy is enabled in the cluster.Related Commands Command Descriptionstandby ipEnables HSRP on the interface. For syntax information, select Cisco IOS IPCommand Reference, Volume 1 of 3:Addressing and Services,Release 12.2 > IP Services Commands.show clusterDisplays the cluster status and a summary of the cluster to which the switchbelongs.show standby Displays standby group information. For syntax information, select CiscoIOS IP Command Reference, Volume 1 of 3:Addressing and Services,Release 12.2 > IP Services Commands.2-122Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08