Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

oot systemChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS CommandsWhen you enter the boot system switch number or the boot system switch all command on the stackmaster, the stack master checks if a software image is already on the stack member (except on the stackmaster). If the software image does not exist on the stack member (for example, stack member 1), anerror message like this appears:%Command to set boot system switch all xxx on switch=1 failedWhen you enter the boot system switch number command on the stack master, you can specify only onestack member for the number variable. Entering more than one stack member for the number variable isnot supported.If you are using the archive download-sw privileged EXEC command to maintain system images, younever need to use the boot system command. The boot system command is automatically manipulatedto load the downloaded image.This command changes the setting of the BOOT environment variable. For more information, seeAppendix A “Catalyst 3750-E and 3560-E Switch Boot Loader Commands.”Related Commands Command Descriptionshow bootDisplays the settings of the boot environment variables.2-76Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08