Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

class-mapChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS CommandsIf you enter the match-all or match-any keyword, you can only use it to specify an extended namedaccess control list (ACL) with the match access-group acl-index-or-name class-map configurationcommand.To define packet classification on a physical-port basis, only one match command per class map issupported. In this situation, the match-all and match-any keywords are equivalent.Only one ACL can be configured in a class map. The ACL can have multiple access control entries(ACEs).ExamplesThis example shows how to configure the class map called class1 with one match criterion, which is anaccess list called 103:Switch(config)# access-list 103 permit ip any any dscp 10Switch(config)# class-map class1Switch(config-cmap)# match access-group 103Switch(config-cmap)# exitThis example shows how to delete the class map class1:Switch(config)# no class-map class1You can verify your settings by entering the show class-map privileged EXEC command.Related Commands Command DescriptionclassDefines a traffic classification match criteria (through the police,set, and trust policy-map class configuration commands) for thespecified class-map name.match (class-mapDefines the match criteria to classify traffic.configuration)policy-mapCreates or modifies a policy map that can be attached to multipleports to specify a service policy.show class-mapDisplays QoS class maps.2-88Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08