Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsaaa authorization networkaaa authorization networkUse the aaa authorization network global configuration command on the switch stack or on astandalone switch to the configure the switch to use user-RADIUS authorization for all network-relatedservice requests, such as IEEE 802.1x per-user access control lists (ACLs) or VLAN assignment. Usethe no form of this command to disable RADIUS user authorization.aaa authorization network default group radiusno aaa authorization network defaultSyntax Descriptiondefault groupradiusUse the list of all RADIUS hosts in the server group as the default authorizationlist.DefaultsAuthorization is disabled.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesUse the aaa authorization network default group radius global configuration command to allow theswitch to download IEEE 802.1x authorization parameters from the RADIUS servers in the defaultauthorization list. The authorization parameters are used by features such as per-user ACLs or VLANassignment to get parameters from the RADIUS servers.Use the show running-config privileged EXEC command to display the configured lists of authorizationmethods.ExamplesThis example shows how to configure the switch for user RADIUS authorization for all network-relatedservice requests:Switch(config)# aaa authorization network default group radiusYou can verify your settings by entering the show running-config privileged EXEC command.Related CommandsCommandshow running-configDescriptionDisplays the operating configuration. For syntax information, use this link tothe Cisco IOS Release 12.2 Command Reference listing page:http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_reference_list.htmlSelect the Cisco IOS Commands Master List, Release 12.2 to navigate tothe command.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-5