Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

oot enable-breakChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsboot enable-breakUse the boot enable-break global configuration command on a standalone switch to enable interruptingthe automatic boot process. Use the no form of this command to return to the default setting.boot enable-breakno boot enable-breakSyntax DescriptionThis command has no arguments or keywords.DefaultsDisabled. The automatic boot process cannot be interrupted by pressing the Break key on the console.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesThis command works properly only from a standalone switch in a stack.When you enter this command, you can interrupt the automatic boot process by pressing the Break keyon the console after the flash file system is initialized.NoteDespite the setting of this command, you can interrupt the automatic boot process at any time by pressingthe MODE button on the switch front panel.This command changes the setting of the ENABLE_BREAK environment variable. For moreinformation, see Appendix A “Catalyst 3750-E and 3560-E Switch Boot Loader Commands.”Related CommandsCommandshow bootDescriptionDisplays the settings of the boot environment variables.2-70Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08