Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

ip dhcp snoopingChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsip dhcp snoopingUse the ip dhcp snooping global configuration command on the switch stack or on a standalone switchto globally enable DHCP snooping. Use the no form of this command to return to the default setting.ip dhcp snoopingno ip dhcp snoopingSyntax DescriptionThis command has no arguments or keywords.DefaultsDHCP snooping is disabled.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesFor any DHCP snooping configuration to take effect, you must globally enable DHCP snooping.DHCP snooping is not active until you enable snooping on a VLAN by using the ip dhcp snooping vlanvlan-id global configuration command.ExamplesThis example shows how to enable DHCP snooping:Switch(config)# ip dhcp snoopingYou can verify your settings by entering the show ip dhcp snooping user EXEC command.Related CommandsCommandip dhcp snooping vlanshow ip dhcp snoopingshow ip dhcp snooping bindingDescriptionEnables DHCP snooping on a VLAN.Displays the DHCP snooping configuration.Displays the DHCP snooping binding information.2-232Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08