Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsmls qos rewrite ip dscpExamplesThis example shows how to enable DSCP transparency and configure the switch to not change the DSCPvalue of the incoming IP packet:Switch(config)# mls qosSwitch(config)# no mls qos rewrite ip dscpThis example shows how to disable DSCP transparency and configure the switch to change the DSCPvalue of the incoming IP packet:Switch(config)# mls qosSwitch(config)# mls qos rewrite ip dscpYou can verify your settings by entering the show running config | include rewrite privileged EXECcommand.Related Commands Command Descriptionmls qosEnables QoS globally.show mls qosDisplays QoS information.show running-config |include rewriteDisplays the DSCP transparency setting. For syntax information, selectCisco IOS Release 12.2 Configuration Guides and CommandReferences > Cisco IOS Fundamentals Command Reference,Release 12.2 > File Management Commands > Configuration FileManagement Commands.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-369