Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET
11.07.2015 • Views
Share Embed Flag

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

SHOW MORE
SHOW LESS
ePAPER READ
DOWNLOAD ePAPER
cisco.dnip.net

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

ipv6 mld snooping vlanChapter 2<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> <strong>Cisco</strong> <strong>IOS</strong> Comm<strong>and</strong>sipv6 mld snooping vlanUse the ipv6 mld snooping vlan global configuration comm<strong>and</strong> on the switch stack or on a st<strong>and</strong>aloneswitch to configure IP version 6 (IPv6) Multicast Listener Discovery (MLD) snooping parameters on theVLAN interface. Use the no form of this comm<strong>and</strong> to reset the parameters to the default settings.ipv6 mld snooping vlan vlan-id [immediate-leave | mrouter interface interface-id | staticipv6-multicast-address interface interface-id]no ipv6 mld snooping vlan vlan-id [immediate-leave | mrouter interface interface-id | staticip-address interface interface-id]NoteThis comm<strong>and</strong> is available only if you have configured a dual IPv4 <strong>and</strong> IPv6 <strong>Switch</strong> DatabaseManagement (SDM) template on the switch.Syntax Descriptionvlan vlan-id Specify a VLAN number. The range is 1 to 1001 <strong>and</strong> 1006 to 4094.immediate-leave(Optional) Enable MLD Immediate-Leave processing on a VLANinterface. Use the no form of the comm<strong>and</strong> to disable the ImmediateLeave feature on the interface.mrouter interface(Optional) Configure a multicast router port. The no form of thecomm<strong>and</strong> removes the configuration.static ipv6-multicast-address (Optional) Configure a multicast group with the specified IPv6multicast address.interface interface-id Add a Layer 2 port to the group. The mrouter or static interface can bea physical port or a port-channel interface in the range of 1 to 48.Comm<strong>and</strong> DefaultMLD snooping Immediate-Leave processing is disabled.By default, there are no static IPv6 multicast groups.By default, there are no multicast router ports.Comm<strong>and</strong> ModesGlobal configurationComm<strong>and</strong> HistoryRelease12.2(35)SE2ModificationThis comm<strong>and</strong> was introduced.Usage GuidelinesTo configure the dual IPv4 <strong>and</strong> IPv6 template, enter the sdm prefer dual-ipv4-<strong>and</strong>-ipv6 {default | vlan)global configuration comm<strong>and</strong> <strong>and</strong> reload the switch.You should only configure the Immediate-Leave feature when there is only one receiver on every port inthe VLAN. The configuration is saved in NVRAM.The static keyword is used for configuring the MLD member ports statically.2-304<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> Comm<strong>and</strong> ReferenceOL-9776-08

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!