Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

mls qos srr-queue input dscp-mapChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsmls qos srr-queue input dscp-mapUse the mls qos srr-queue input dscp-map global configuration command on the switch stack or on astandalone switch to map Differentiated Services Code Point (DSCP) values to an ingress queue or tomap DSCP values to a queue and to a threshold ID. Use the no form of this command to return to thedefault setting.mls qos srr-queue input dscp-map queue queue-id {dscp1...dscp8 | threshold threshold-iddscp1...dscp8}no mls qos srr-queue input dscp-mapSyntax Descriptionqueue queue-iddscp1...dscp8threshold threshold-iddscp1...dscp8Specify a queue number.For queue-id, the range is 1 to 2.Map DSCP values to an ingress queue.For dscp1...dscp8, enter up to eight values, and separate each value with aspace. The range is 0 to 63.Map DSCP values to a queue threshold ID.For threshold-id, the range is 1 to 3.For dscp1...dscp8, enter up to eight values, and separate each value with aspace. The range is 0 to 63.DefaultsTable 2-19 shows the default DSCP input queue threshold map:Table 2-19Default DSCP Input Queue Threshold MapDSCP Value Queue ID–Threshold ID0–39 1–140–47 2–148–63 1–1Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.2-376Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08