Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsip sship sshUse the ip ssh global configuration command on the switch stack or on a standalone switch to configurethe switch to run Secure Shell (SSH) Version 1 or SSH Version 2. Use the no form of this command toreturn to the default setting.ip ssh version [1 | 2]no ip ssh version [1 | 2]Syntax Description1 (Optional) Configure the switch to run SSH Version 1 (SSHv1).2 (Optional) Configure the switch to run SSH Version 2 (SSHv2).DefaultsThe default version is the latest SSH version supported by the SSH client.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesIf you do not enter this command or if you do not specify a keyword, the SSH server selects the latestSSH version supported by the SSH client. For example, if the SSH client supports SSHv1 and SSHv2,the SSH server selects SSHv2.The switch supports an SSHv1 or an SSHv2 server. It also supports an SSHv1 client. For moreinformation about the SSH server and the SSH client, see the software configuration guide for thisrelease.A Rivest, Shamir, and Adelman (RSA) key pair generated by an SSHv1 server can be used by an SSHv2server and the reverse.ExamplesThis example shows how to configure the switch to run SSHv2:Switch(config)# ip ssh version 2You can verify your settings by entering the show ip ssh or show ssh privileged EXEC command.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-273