Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

authentication command bounce-port ignoreChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsauthentication command bounce-port ignoreUse the authentication command bounce-port ignore global configuration command on the switchstack or on a standalone switch to allow the switch to ignore a command to temporarily disable a port.Use the no form of this command to return to the default status.authentication command bounce-port ignoreno authentication command bounce-port ignoreSyntax DescriptionThis command has no arguments or keywords.DefaultsThe switch accepts a RADIUS Change of Authorization (CoA) bounce port command.Command ModesGlobal configurationCommand HistoryRelease12.2(52)SEModificationThis command was introduced.Usage GuidelinesThe CoA bounce port command causes a link flap, which triggers a DHCP renegotiation from the host.This is useful when a VLAN change occurs and the endpoint is a device such as a printer, that has nosupplicant to detect the change. Use this command to configure the switch to ignore the bounce portcommand.ExamplesThis example shows how to instruct the switch to ignore a CoA bounce port command:Switch(config)# authentication command bounce-port ignoreRelated CommandsCommandauthentication commanddisable-port ignoreDescriptionConfigures the switch to ignore a CoA disable port command.2-22Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08