Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

dot1x paeChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsdot1x paeUse the dot1x pae interface configuration command on the switch stack or on a standalone switch toconfigure the port as an IEEE 802.1x port access entity (PAE) authenticator. Use the no form of thiscommand to disable IEEE 802.1x authentication on the port.dot1x pae authenticatorno dot1x paeSyntax DescriptionThis command has no arguments or keywords.DefaultsThe port is not an IEEE 802.1x PAE authenticator, and IEEE 802.1x authentication is disabled on theport.Command ModesInterface configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesUse the no dot1x pae interface configuration command to disable IEEE 802.1x authentication on theport.When you configure IEEE 802.1x authentication on a port, such as by entering the dot1x port-controlinterface configuration command, the switch automatically configures the port as an EEE 802.1xauthenticator. After the no dot1x pae interface configuration command is entered, the AuthenticatorPAE operation is disabled.ExamplesThis example shows how to disable IEEE 802.1x authentication on the port:Switch(config-if)# no dot1x paeYou can verify your settings by entering the show dot1x or show eap privileged EXEC command.Related CommandsCommandshow dot1xshow eapDescriptionDisplays IEEE 802.1x statistics, administrative status, andoperational status for the switch or for the specified port.Displays EAP registration and session information for theswitch or for the specified port.2-170Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08