Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsarchive download-swarchive download-swUse the archive download-sw privileged EXEC command on the switch stack or on a standalone switchto download a new image from a TFTP server to the switch or switch stack and to overwrite or keep theexisting image.archive download-sw [/allow-feature-upgrade | /destination-system stack-member-number |/directory | /force-reload | /imageonly | /leave-old-sw | /no-set-boot | /no-version-check |/only-system-type system-type | /overwrite | /reload | /safe] source-url1 [source-url2source-url3 source-url4]archive download-sw [/allow-feature-upgrade | /destination-system stack-member-number |/directory | /force-reload | /imageonly | /leave-old-sw | /no-set-boot | /no-version-check |/only-system-type system-type | /overwrite | /reload | /safe] /directory source-url1[source-url2 source-url3 source-url4]Syntax Description /allow-feature-upgrade Allow installation of software images with different feature sets (forexample, upgrade from the IP base feature set to the IP services featuresset)./destination-systemstack-member-numberSpecify the specific stack member to be upgraded. The range is 1 to 9.This keyword is supported only on stacking-capable switches./directorySpecify a directory for all of the images./force-reload/imageonly/leave-old-sw/no-set-boot/no-version-check/only-system-typesystem-type/overwrite/reload/safeUnconditionally force a system reload after successfully downloading thesoftware image.Download only the software image but not the HTML files associated withthe embedded device manager. The HTML files for the existing version aredeleted only if the existing version is being overwritten or removed.Keep the old software version after a successful download.Do not alter the setting of the BOOT environment variable to point to thenew software image after it is successfully downloaded.Download the software image without checking the compatibility of thestack protocol version on the image and on the switch stack.This keyword is supported only on stacking-capable switches.Specify the specific system type to be upgraded. The range is 0 toFFFFFFFF.This keyword is supported only on stacking-capable switches.Overwrite the software image in flash memory with the downloaded one.Reload the system after successfully downloading the image unless theconfiguration has been changed and not been saved.Keep the current software image; do not delete it to make room for the newsoftware image before the new image is downloaded. The current image isdeleted after the download.OL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-11