11.07.2015 Views

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

ip dhcp snooping vlan information option format-type circuit-id stringChapter 2<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> <strong>Cisco</strong> <strong>IOS</strong> Comm<strong>and</strong>sip dhcp snooping vlan information option format-type circuit-idstringUse the ip dhcp snooping vlan information option format-type circuit-id string interfaceconfiguration comm<strong>and</strong> on the switch stack or on a st<strong>and</strong>alone switch to configure the option-82circuit-ID suboption. Use the no form of this comm<strong>and</strong> to configure the default circuit-ID suboption.ip dhcp snooping vlan vlan information option format-type circuit-id [override] stringASCII-stringno ip dhcp snooping vlan vlan information option format-type circuit-id [override] stringSyntax Descriptionvlan vlan Specify the VLAN ID. The range is 1 to 4094.override(Optional) Specify an override string, using from 3 to 63 ASCIIcharacters (no spaces).string ASCII-stringSpecify a circuit ID, using from 3 to 63 ASCII characters (nospaces).DefaultsThe switch VLAN <strong>and</strong> the port identifier, in the format vlan-mod-port, is the default circuit ID.Comm<strong>and</strong> ModesInterface configurationComm<strong>and</strong> HistoryRelease12.2(35)SE212.2(52)SEModificationThis comm<strong>and</strong> was introduced.The override keyword was added.Usage GuidelinesYou must globally enable DHCP snooping by using the ip dhcp snooping global configurationcomm<strong>and</strong> for any DHCP snooping configuration to take effect.When the option-82 feature is enabled, the default circuit-ID suboption is the switch VLAN <strong>and</strong> the portidentifier, in the format vlan-mod-port. This comm<strong>and</strong> allows you to configure a string of ASCIIcharacters to be the circuit ID. When you want to override the vlan-mod-port format type <strong>and</strong> insteaduse the circuit-ID to define subscriber information, use the override keyword.NoteWhen configuring a large number of circuit IDs on a switch, consider the impact of lengthy characterstrings on the NVRAM or flash memory. If the circuit-ID configurations, combined with other data,exceed the capacity of the NVRAM or the flash memory, an error message appears.2-246<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> Comm<strong>and</strong> ReferenceOL-9776-08

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!