11.07.2015 Views

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

mac address-table notificationChapter 2<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> <strong>Cisco</strong> <strong>IOS</strong> Comm<strong>and</strong>smac address-table notificationUse the mac address-table notification global configuration comm<strong>and</strong> on the switch stack or on ast<strong>and</strong>alone switch to enable the MAC address notification feature on the switch or the switch stack. Usethe no form of this comm<strong>and</strong> to return to the default setting.mac address-table notification {change [history-size value | interval value] | mac-move |threshold [[limit percentage] interval time]}no mac address-table notification {change [history-size value | interval value] | mac-move |threshold [[limit percentage] interval time]}Syntax Descriptionchangehistory-size valueinterval valuemac-movethresholdlimit percentageinterval timeEnable or disable the MAC notification on the switch.(Optional) Configure the maximum number of entries in the MACnotification history table. The range is 0 to 500 entries. The default is 1.(Optional) Set the notification trap interval. The switch or the switch stacksends the notification traps when this amount of time has elapsed. The rangeis 0 to 2147483647 seconds. The default is 1 second.Enable MAC move notification.Enable MAC threshold notification.(Optional) Enter the MAC utilization threshold percentage. The range is 1 to100 percent. The default is 50 percent.(Optional) Enter the time between MAC threshold notifications. The range is120 to 1000000 seconds. The default is 120 seconds.DefaultsBy default, the MAC address notification, MAC move, <strong>and</strong> MAC threshold monitoring are disabled.The default MAC change trap interval is 1 second.The default number of entries in the history table is 1.The default MAC utilization threshold is 50 percent.The default time between MAC threshold notifications is 120 seconds.Comm<strong>and</strong> ModesGlobal configurationComm<strong>and</strong> HistoryRelease12.2(35)SE212.2(40)SEModificationThis comm<strong>and</strong> was introduced.The change, mac-move, <strong>and</strong> threshold [[limit percentage] interval time]keywords were added.2-340<strong>Catalyst</strong> <strong>3750</strong>-E <strong>and</strong> <strong>3560</strong>-E <strong>Switch</strong> Comm<strong>and</strong> ReferenceOL-9776-08

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!