Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

Chapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandspower inline policepower inline policeTo enable policing of real-time power consumption on a powered device, use the power inline policeinterface configuration command. To disable this feature, use the no form of this commandpower inline police [action {errdisable | log}]no power inline policeSyntax Descriptionaction errdisableaction log(Optional) If the real-time power consumption exceeds the maximumpower allocation on the port, configures the switch to turn off power tothe port. This is the default action.(Optional) If the real-time power consumption exceeds the maximumpower allocation on the port, configures the switch to generate a syslogmessage while the switch still provides power to the connected device.DefaultsPolicing of the real-time power consumption of the powered device is disabled.Command ModesInterface configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesThis command is supported only on Power over Ethernet (PoE)-capable ports. If you enter this commandon a switch or port that does not support PoE, an error message appears.In a switch stack, this command is supported on all switches or ports in the stack that support PoE andreal-time power-consumption monitoring.When policing of the real-time power consumption is enabled, the switch takes action when a powereddevice consumes more power than the allocated maximum amount.When PoE is enabled, the switch senses the real-time power consumption of the powered device. Thisfeature is called power monitoring or power sensing. The switch also polices the power usage with thepower policing feature.When power policing is enabled, the switch uses one of the these values as the cutoff power on the PoEport in this order:1. The user-defined power level that the switch budgets for the port when you enter the power inlineconsumption default wattage global configuration command or the power inline consumptionwattage interface configuration command.2. The user-defined power level that limits the power allowed on the port when you enter the powerinline auto max max-wattage or the power inline static max max-wattage interface configurationcommandOL-9776-08Catalyst 3750-E and 3560-E Switch Command Reference2-441