Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

oot private-config-fileChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsboot private-config-fileUse the boot private-config-file global configuration command on a standalone switch to specify thefilename that Cisco IOS uses to read and write a nonvolatile copy of the private configuration. Use theno form of this command to return to the default setting.boot private-config-file filenameno boot private-config-fileSyntax DescriptionfilenameThe name of the private configuration file.DefaultsThe default configuration file is private-config.Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.Usage GuidelinesThis command works properly only from a standalone switch in a stack.Filenames are case sensitive.ExamplesThis example shows how to specify the name of the private configuration file to be pconfig:Switch(config)# boot private-config-file pconfigRelated CommandsCommandshow bootDescriptionDisplays the settings of the boot environment variables.2-74Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08