Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

dot1x test eapol-capableChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsdot1x test eapol-capableUse the dot1x test eapol-capable privileged EXEC command on the switch stack or on a standaloneswitch to monitor IEEE 802.1x activity on all the switch ports and to display information about thedevices that are connected to the ports that support IEEE 802.1x.dot1x test eapol-capable [interface interface-id]Syntax Descriptioninterface interface-id(Optional) Port to be queried.DefaultsThere is no default setting.Command ModesPrivileged EXECCommand HistoryRelease12.2(44)SEModificationThis command was introduced.Usage GuidelinesUse this command to test the IEEE 802.1x capability of the devices connected to all ports or to specificports on a switch.There is not a no form of this command.ExamplesThis example shows how to enable the IEEE 802.1x readiness check on a switch to query a port. It alsoshows the response received from the queried port verifying that the device connected to it isIEEE 802.1x-capable:switch# dot1x test eapol-capable interface gigabitethernet1/0/13DOT1X_PORT_EAPOL_CAPABLE:DOT1X: MAC 00-01-02-4b-f1-a3 on gigabitethernet1/0/13 is EAPOLcapableRelated CommandsCommanddot1x test timeout timeoutDescriptionConfigures the timeout used to wait for EAPOL response toan IEEE 802.1x readiness query.2-176Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08