Catalyst 3750-E and 3560-E Switch Cisco IOS ... - DNIP . NET

mls qos srr-queue output cos-mapChapter 2Catalyst 3750-E and 3560-E Switch Cisco IOS Commandsmls qos srr-queue output cos-mapUse the mls qos srr-queue output cos-map global configuration command on the switch stack or on astandalone switch to map class of service (CoS) values to an egress queue or to map CoS values to aqueue and to a threshold ID. Use the no form of this command to return to the default setting.mls qos srr-queue output cos-map queue queue-id {cos1...cos8 | threshold threshold-idcos1...cos8}no mls qos srr-queue output cos-mapSyntax Descriptionqueue queue-idcos1...cos8threshold threshold-idcos1...cos8Specify a queue number.For queue-id, the range is 1 to 4.Map CoS values to an egress queue.For cos1...cos8, enter up to eight values, and separate each value with aspace. The range is 0 to 7.Map CoS values to a queue threshold ID.For threshold-id, the range is 1 to 3.For cos1...cos8, enter up to eight values, and separate each value with aspace. The range is 0 to 7.DefaultsTable 2-20 shows the default CoS output queue threshold map:Table 2-20Default Cos Output Queue Threshold MapCoS Value Queue ID–Threshold ID0, 1 2–12, 3 3–14 4–15 1–16, 7 4–1Command ModesGlobal configurationCommand HistoryRelease12.2(35)SE2ModificationThis command was introduced.2-382Catalyst 3750-E and 3560-E Switch Command ReferenceOL-9776-08